RADIO CONTROLLED CHOKERS

Setting a Radio Controlled Choker

The RCC is set in almost the same manner as a regular choker and is possibly easier. The sequence of steps is as follows:

1. Push the spring-loaded latch pin on the RCC until it latches in place, then wrap the cable around the log.
2. Insert the knob into the cup on the choker.
3. Swing the RCC body closed, locking the knob into the cup.

Three Steps to Set a Radio Controlled Choker.

The spring loaded action of the latching pin makes latching and unlatching possible with the pin set, as required.